Loosing the nuts under the bottom of the bowl and lifting the seat up. Therefore you need to remove your original toilet seat so that the bracket can be placed in the right place. You need to insert a bracket between the toilet seat and the bowl instead of replacing the seat completely. Installing this Luxe Bidet Neo 120 is different from installing a bidet seat. I installed it with my hands, but you can also do it with a wrench. Remember to put the gasket at the top of the T-valve and then screw the T-valve tightly. The T-adaptor has been included in the kit, and this metal component is made with solid material that will last for years. Except for the main unit of Luxe Neo 120, this is the most crucial part. T-adaptor is for diverting water to bidet and toilet together. Step 5: Attach the T-adaptor to the tank inlet
Once you get the end of the water supply line unattached, place it into the bucket or on the soft cloths, preventing water spread over the place. But sometimes, you will need the help of a wrench. Sometimes, you can remove the water supply line from the water tank inlet by hand. Therefore, you need to prepare a bucket or soft cloth to catch water. There will be some water remaining in the water supply line. If it is the case, the shutoff valve is not fully closed. You should also check if the water keeps coming into the tank. Opening the tank top is a good way to ensure how much water is left in the tank. You can get it done by flushing the toilet and holding the handle down until all the water runs out. Step 3: Empty the toilet tankĪs we need to remove the water supply line later, we need to empty the toilet tank. To turn off the shutoff valve, you should turn the valve counter-clockwise. If you don’t turn it off while installing a bidet, the water coming out will flood your bathroom. The shutoff valve near the toilet regulates if and how much water can be sent to the toilet tank. If you haven’t got a Luxe Bidet Neo 120 yet, you can check our review here. If you find the end of the water supply line is too hard to remove, you may need to prepare an adjustable wrench. The only thing you need to prepare is a bucket or some soft cloth to catch the water remaining in the tank or hose. You can find the main unit, a water hose, a T-adaptor, some gaskets, a roll of Teflon tape, and even a small plastic wrench in it.
LUXE BIDET NEO 120 INSTALL
Luxe has prepared almost everything you need to install this NEO 120 model in its package as a reputable bidet brand. Notes for installing the Luxe Bidet Neo 120 attachment on the one-piece toilet.Step 9: Turn on the shutoff valve and check for leaks.Step 8: Connect Luxe Bidet Neo 120 to T-valve.Step 7: Place the Luxe Bidet Neo 120 on the toilet and put the toilet seat back.Step 6: Remove the existing toilet seat.Step 5: Attach the T-adaptor to the tank inlet.
0 kommentar(er)
